Fury Road V8 Interceptor

Vehicle models, character models, commercial kits, custom kits, and so on.

Fury Road V8 Interceptor

Postby AL775 » Mon Jul 20, 2015 2:03 am

Hi everyone, here is my Fury Road version of the Interceptor. I used the Aoshima Model for this build. Its a work in progress. Hope you like it :)

WP_20150720_050.jpg
WP_20150720_050.jpg (118.09 KiB) Viewed 1461 times

WP_20150720_046.jpg
WP_20150720_046.jpg (120.71 KiB) Viewed 1461 times

WP_20150720_040.jpg
WP_20150720_040.jpg (99.5 KiB) Viewed 1461 times

WP_20150720_031.jpg
WP_20150720_031.jpg (125 KiB) Viewed 1461 times

WP_20150720_037.jpg
WP_20150720_037.jpg (117.07 KiB) Viewed 1461 times
Last edited by AL775 on Mon Jul 20, 2015 2:10 am, edited 1 time in total.
AL775
 
Posts: 18
Joined: Sun Jul 19, 2015 5:12 pm

Re: Fury Road V8 Interceptor

Postby AL775 » Mon Jul 20, 2015 2:05 am

Here are some more photos. Apologies for the quality:

WP_20150720_053.jpg
WP_20150720_053.jpg (114.36 KiB) Viewed 1459 times

WP_20150720_059.jpg
WP_20150720_059.jpg (115.19 KiB) Viewed 1459 times

WP_20150720_052.jpg
WP_20150720_052.jpg (110.33 KiB) Viewed 1459 times
AL775
 
Posts: 18
Joined: Sun Jul 19, 2015 5:12 pm

Re: Fury Road V8 Interceptor

Postby Taipan » Mon Jul 20, 2015 2:17 am

Hey! Welcome to the forum!

Looking good so far, I reckon the rag-tyre is going to be a bit of a challenge. I got you some pics from Top Gear magazine that show some detail of the car, might come in handy:

Interceptor top.jpg
Interceptor top.jpg (318.13 KiB) Viewed 1454 times

Driver door.jpg
Driver door.jpg (42.03 KiB) Viewed 1454 times

floor.jpg
floor.jpg (48.63 KiB) Viewed 1454 times

blown tyre.jpg
blown tyre.jpg (56.48 KiB) Viewed 1454 times

interior.jpg
interior.jpg (125.93 KiB) Viewed 1454 times
At last the Vermin had inherited the Earth
User avatar
Taipan
 
Posts: 1472
Joined: Mon Feb 09, 2004 9:14 am
Location: The Wasteland

Re: Fury Road V8 Interceptor

Postby Wozza » Mon Jul 20, 2015 6:02 am

Great work, glad you fixed that top spoiler too! I always hated that on this kit....
Wozza
 
Posts: 53
Joined: Sun Oct 03, 2010 9:07 am

Re: Fury Road V8 Interceptor

Postby AL775 » Mon Jul 20, 2015 11:19 am

Taipan wrote:Hey! Welcome to the forum!

Looking good so far, I reckon the rag-tyre is going to be a bit of a challenge. I got you some pics from Top Gear magazine that show some detail of the car, might come in handy:



Thanks for your suggestions Taipan :D . Yes the Tyre is such a challenge! I am still thinking of ways to try and get it right! I also want to maybe even change the rims to be more accurate to the actual car. Currently the rims are the stock Aoshima Kit. Hopefully someone knows a website/source where I can purchase the correct rims?

Wozza wrote:Great work, glad you fixed that top spoiler too! I always hated that on this kit....


Thanks for your comcent Wozza! The spoiler required a lot of careful filing to get rid of that extra plastic. I then had to use model filler to fill in that big gap after the filing.
AL775
 
Posts: 18
Joined: Sun Jul 19, 2015 5:12 pm

Re: Fury Road V8 Interceptor

Postby Hetzer » Mon Jul 20, 2015 8:18 pm

That looks great. That roof spoiler sure s a bitch, I wouldn't mind if it be solid but they just had to make it hollow too :evil:
Hetzer
 
Posts: 131
Joined: Sun Jun 07, 2015 8:23 am

Re: Fury Road V8 Interceptor

Postby PhilC » Mon Jul 20, 2015 10:54 pm

And that is the best way to go about fixing that roof spoiler up i think. Pre fill it with a putty and then cut away the back of it afterwards. I did that with the one i started and it worked out pretty good. ;)

AL you're FR Interceptor is looking great there. Everything from the smashed cover on the front to the collection of stuff in the back looks the part. Nice work! :)
PhilC
 
Posts: 180
Joined: Thu Jan 01, 2015 7:58 pm

Re: Fury Road V8 Interceptor

Postby rockatansky4073 » Tue Jul 21, 2015 12:02 am

This is killer, man!

I'm building Razor cola and the Fury Road BoB, using the Cavalier kit.

The tyres on them are rubber, so it makes the rag tyre thing easier.
I did exactly like the movie and sewed wire through the rubber criss crossing the rags to the tyre.
Very tedious work, but looks great.

Loving that the Fury Road Bob is not getting ignored since Part 2's still gets most the attention.
FRIENDS DON'T LET FRIENDS DOWNLOAD FURY ROAD!
User avatar
rockatansky4073
 
Posts: 5232
Joined: Sat Dec 21, 2002 6:30 am

Re: Fury Road V8 Interceptor

Postby Taipan » Tue Jul 21, 2015 12:41 am

BTW, notice the spot where the boot spoiler used to be, nice little detail, made to tie the movie in with the game, at least that was the plan.
At last the Vermin had inherited the Earth
User avatar
Taipan
 
Posts: 1472
Joined: Mon Feb 09, 2004 9:14 am
Location: The Wasteland

Re: Fury Road V8 Interceptor

Postby rockatansky4073 » Tue Jul 21, 2015 2:23 am

Those boot spoilers are pricks to cut and file off the Cavalier.
Too deep and you'll make it uneven and stuck trying to file the whole area down to match.
Not enough and critics like us fans will spot it ;)
FRIENDS DON'T LET FRIENDS DOWNLOAD FURY ROAD!
User avatar
rockatansky4073
 
Posts: 5232
Joined: Sat Dec 21, 2002 6:30 am

Next

Return to Models and Modelling

Who is online

Users browsing this forum: No registered users and 1 guest