INTERCEPTOR in AUSTRIA

Like the name says...

Re: INTERCEPTOR in AUSTRIA

Postby ANGELofFEAR » Thu Feb 02, 2012 12:32 pm

thx for helping soon, yes will tell about if it goes on first i have to look to get him run, need a new batterie and change the starter its so not work, after he is running will look what can do. i next time i need a 4 speed toploader komplet wuthe bell and all i need for changing from auto to 4 speed, if somebody have some toploader please tell me. i know that some partrs from the us cars fitting on the falcon and they are muche easier to get from here as the parts from australia, can somebody tell me what will fit and from wich us car thx tom
User avatar
ANGELofFEAR
 
Posts: 103
Joined: Fri Nov 18, 2011 1:24 am

Re: INTERCEPTOR in AUSTRIA

Postby MFP1 » Fri Feb 03, 2012 12:49 pm

Toploader Trans from USA will work, but you need Australian Bell Housing to set up factory hydro clutch slave cyl. Also will need clutch Master Cyl, Plumbing and Pedal Doghouse from Australia. A cool alternitive that lots of Mad Max Cars clients are doing lately is a Tremek 5 speed, and use a Scatter shield to weld on slave cyl bracket, allowing you to use almost any aftermarket comp hydro clutch you prefer.... then you really only need the pedals.
"We'll see you on the road scag, We'll see you like we saw the nightrider!!!", "Perhaps its a result of anxiety...." MFP1
User avatar
MFP1
 
Posts: 891
Joined: Mon May 13, 2002 1:42 am
Location: International Hero & Fantasy Car Ranch, Seattle

Re: INTERCEPTOR in AUSTRIA

Postby ANGELofFEAR » Sat Feb 04, 2012 1:57 pm

ok, this is what i do not know , the pedals i have here so i will look in australia, for a gearbox for the first time will let it an autom. no problem
User avatar
ANGELofFEAR
 
Posts: 103
Joined: Fri Nov 18, 2011 1:24 am

Re: INTERCEPTOR in AUSTRIA

Postby ANGELofFEAR » Tue Feb 07, 2012 5:16 am

11.jpg
11.jpg (181.67 KiB) Viewed 1186 times
so yesterday i change the starter, now the engine gonna start up. but i was a terrible day for. when i wörk under the car see, hard damage on the botton of my car. the fuel tank, both shocks, the exhause, bothe side the botton metal are damage , and the cardan shaft, fuck it became from the transport. see picutres .
Attachments
55.jpg
55.jpg (91.44 KiB) Viewed 1186 times
44.jpg
44.jpg (130.03 KiB) Viewed 1186 times
33.jpg
33.jpg (127.26 KiB) Viewed 1186 times
22.jpg
22.jpg (109.69 KiB) Viewed 1186 times
User avatar
ANGELofFEAR
 
Posts: 103
Joined: Fri Nov 18, 2011 1:24 am

Re: INTERCEPTOR in AUSTRIA

Postby ANGELofFEAR » Tue Feb 07, 2012 5:21 am

my mechaniker looks teh damage hs tells me it will be 4-5000- $ for the repair
Attachments
555.jpg
555.jpg (129.4 KiB) Viewed 1187 times
444.jpg
444.jpg (115.17 KiB) Viewed 1187 times
333.jpg
333.jpg (123.45 KiB) Viewed 1187 times
222.jpg
222.jpg (93.17 KiB) Viewed 1187 times
111.jpg
111.jpg (208.62 KiB) Viewed 1187 times
User avatar
ANGELofFEAR
 
Posts: 103
Joined: Fri Nov 18, 2011 1:24 am

Re: INTERCEPTOR in AUSTRIA

Postby ANGELofFEAR » Tue Feb 07, 2012 5:24 am

so a shit
Attachments
5555.jpg
5555.jpg (133.31 KiB) Viewed 1187 times
4444.jpg
4444.jpg (138.47 KiB) Viewed 1187 times
3333.jpg
3333.jpg (133.66 KiB) Viewed 1187 times
2222.jpg
2222.jpg (125.96 KiB) Viewed 1187 times
1111.jpg
1111.jpg (135.16 KiB) Viewed 1187 times
User avatar
ANGELofFEAR
 
Posts: 103
Joined: Fri Nov 18, 2011 1:24 am

Re: INTERCEPTOR in AUSTRIA

Postby ANGELofFEAR » Tue Feb 07, 2012 5:27 am

what a fuck
Attachments
55555.jpg
55555.jpg (156.21 KiB) Viewed 1187 times
44444.jpg
44444.jpg (95.02 KiB) Viewed 1187 times
33333.jpg
33333.jpg (130 KiB) Viewed 1187 times
22222.jpg
22222.jpg (155.47 KiB) Viewed 1187 times
11111.jpg
11111.jpg (140.1 KiB) Viewed 1187 times
User avatar
ANGELofFEAR
 
Posts: 103
Joined: Fri Nov 18, 2011 1:24 am

Re: INTERCEPTOR in AUSTRIA

Postby toecutter » Tue Feb 07, 2012 5:24 pm

Was it shipped in a container ? Because that looks like forklift damage to me - as if they picked the car up from the side with the forks underneath.
'Perhaps its a result of an anxiety'
User avatar
toecutter
 
Posts: 572
Joined: Sun Apr 07, 2002 12:17 am

Re: INTERCEPTOR in AUSTRIA

Postby roadwarriormfp » Tue Feb 07, 2012 6:06 pm

yes definately looks like forklift damage... thats pretty digusting frankly!

Was the car running? If not they probably couldnt work out how to tow it (and too lazy to push it) so they got a fork lift to move it.
We are 100% snafu....
User avatar
roadwarriormfp
 
Posts: 3293
Joined: Sat Jul 10, 1999 7:10 pm
Location: Suncity, Australia

Re: INTERCEPTOR in AUSTRIA

Postby ANGELofFEAR » Wed Feb 08, 2012 4:05 am

no the starter was nor ok but yes pusching an devery thing ist ok but not like this this is not ok. but some body have to pay for this damage it will be the shipping companie. :twisted:
User avatar
ANGELofFEAR
 
Posts: 103
Joined: Fri Nov 18, 2011 1:24 am

PreviousNext

Return to Film Cars and Replica Cars

Who is online

Users browsing this forum: Google [Bot] and 1 guest