Scot injector hat/scoup dimensions

Like the name says...

Scot injector hat/scoup dimensions

Postby StudebakerBill » Tue Nov 01, 2016 5:36 pm

I am looking for dimensions for a Scot Slot/Super Slot injector Hat. Need: overall length, width at front, width at back, hight at front, hight at back. Also would like to have a measurement at front of casting i.e. measured from top to bottom at front center point of hat. If anyone has these dimensions I would greatly appreciate it if you could forward them to me. Also, if you have a Scot unit could you take the measurements and send them? Thanks!. Studebaker Bill. P.S: Please forward this message to anyone you think may have the info.
StudebakerBill
 
Posts: 1
Joined: Tue Nov 01, 2016 5:03 pm

Re: Scot injector hat/scoup dimensions

Postby MFP1 » Sat Nov 05, 2016 4:32 pm

Hey Studebaker Bill,
Love the name. Happen to have a 55 Commander here and building a Desert Explorer from parts of the prototype from the Proving Grounds graveyard (Guess that conversation is better suited to the SDC forum).
Cant help wondering what the dimensions are for. Do you need a Scott unit? I know there is an authorized reproduction available from www.madmaxcars.com if you need one for a build. If you don't actually need one, you have me even more curious what the dimensions are for.
"We'll see you on the road scag, We'll see you like we saw the nightrider!!!", "Perhaps its a result of anxiety...." MFP1
User avatar
MFP1
 
Posts: 891
Joined: Mon May 13, 2002 1:42 am
Location: International Hero & Fantasy Car Ranch, Seattle

Re: Scot injector hat/scoup dimensions

Postby themanw/oaname » Mon Nov 07, 2016 6:02 am

i've tried a similar question:
viewtopic.php?f=4&t=10414

met with zero results.

then i found this:
http://www.thingiverse.com/thing:1043515

i think as far as 3d modeling is concerned this isnt the forum you'll get any help with. especially if it takes getting someone out in their garage with a tape measure and 15 minutes of their time. it's bizarre, given most people that are gearheads have no qualms boring people to death about their cars - and given that i'm in a few mustang groups on facebook you have to beg them to shut up and stop making up hashtags.
themanw/oaname
 
Posts: 258
Joined: Wed Jun 05, 2013 12:12 pm
Location: Flaw-duh

Re: Scot injector hat/scoup dimensions

Postby mscar2783 » Fri Nov 11, 2016 3:27 pm

Try Doug McQillin at Doug @ madmaxcar.com . He has a ton of photos and if I recall, measurements.


http://www.madmaxcar.com/frameset.html
mscar2783
 
Posts: 120
Joined: Thu Dec 13, 2007 2:39 pm

Re: Scot injector hat/scoup dimensions

Postby Nuts » Sun Nov 13, 2016 2:38 am

Is it really bizarre? Just the reproduction hat itself has a cost of circular $1500- and you were thanking people "in advance" for all their measurements and time!

Anyway.... these pictures should produce a closer product.... Would love to see the life sized finished result in plastic.

A1.jpg
A1.jpg (169.06 KiB) Viewed 1409 times

A3.jpg
A3.jpg (156.1 KiB) Viewed 1409 times

A4.jpg
A4.jpg (139.26 KiB) Viewed 1409 times

A5.jpg
A5.jpg (168.51 KiB) Viewed 1409 times
Nuts
 
Posts: 69
Joined: Fri Jul 08, 2016 10:28 pm

Re: Scot injector hat/scoup dimensions

Postby themanw/oaname » Mon Dec 12, 2016 6:01 am

Nuts wrote:Is it really bizarre? Just the reproduction hat itself has a cost of circular $1500- and you were thanking people "in advance" for all their measurements and time!

Anyway.... these pictures should produce a closer product.... Would love to see the life sized finished result in plastic.


yeah, actually it's quite bizarre. im not exaggerating having joined a ton of sn95 mustang groups and you practically have to beg people not to share pictures of their mustang. but there's absolutely nothing with a tape measure (until your photos just now) on any part of the interceptor. comparatively, there's a shitload of photos with a tape measure on the proton pack and the ecto 1 from ghostbusters. here we have people that have actually sat in the interceptor in the dezer collection and there are STILL no clear photos of the voodoo head on the dashboard.

my link was created 3 years ago. 3 years ago, i was studying 3d drafting and design in college. buying a replica injector hat for 1500 dollars, defeats the purpose of drafting a 3d model of the system. i was ahead of the class so far that i was practically teaching myself - so i wanted something that was a challenge for me to design and that i could redesign to work on my car. 3d model files that i would have been more than happy to share with the community.


what is so wrong about thanking people in advance for their help?
themanw/oaname
 
Posts: 258
Joined: Wed Jun 05, 2013 12:12 pm
Location: Flaw-duh

Re: Scot injector hat/scoup dimensions

Postby rustycarr » Thu Jan 19, 2017 6:11 am

themanw/oaname wrote:
Nuts wrote: here we have people that have actually sat in the interceptor in the dezer collection and there are STILL no clear photos of the voodoo head on the dashboard.
Attachments
Mad_Max14-700x467.jpg
Mad_Max14-700x467.jpg (73.01 KiB) Viewed 1170 times
V8
rustycarr
 
Posts: 287
Joined: Sat Sep 24, 2011 7:27 pm
Location: TEXAS

Re: Scot injector hat/scoup dimensions

Postby themanw/oaname » Thu Jan 19, 2017 1:04 pm

rustycarr wrote:
themanw/oaname wrote:
Nuts wrote: here we have people that have actually sat in the interceptor in the dezer collection and there are STILL no clear photos of the voodoo head on the dashboard.


thank you so much for that. im saving the photo right now.
themanw/oaname
 
Posts: 258
Joined: Wed Jun 05, 2013 12:12 pm
Location: Flaw-duh

Re: Scot injector hat/scoup dimensions

Postby G Kritty » Sat Jan 21, 2017 10:06 am

Here's an insight to the doll's head. Photos tell the story, or at the very least make up additional clear pics.
Attachments
Dashboard head.jpg
Dashboard head.jpg (177.63 KiB) Viewed 1145 times
User avatar
G Kritty
 
Posts: 64
Joined: Sat May 23, 2015 6:04 pm


Return to Film Cars and Replica Cars

Who is online

Users browsing this forum: No registered users and 2 guests